Progressive Allround
UniZone Perform™
UniZone Perform has fully optimized optics in all directions. Individual calculations of apherization and inset based on prescription and frame parameters. A large number of variations of design and corridor lengths.
Addition: | Engravings | Minimum fitting height: | Design variations: | Soft/Clear: | Default parameters: |
0.75-4.0 | Sign: Symbol: | 14 mm | Distance | Soft | CVD: 13 mm |
Soft: U Distance △ | 16 mm | Balance | Clear | FFT: 4 degrees | |
Clear: Z Balance ▷ | 18 mm | Near | PT: 6 degrees | ||
Near ▽ | 20 mm | Design: Balance Clear |
UniZone Atoric™
UniZone Atoric is an advanced calculated lens without possibility to include the frame parameters. Inset individually calculated based on prescription. Available in four different corridor lengths.
Addition: | Engravings | Minimum fitting height: | Design variations: | Soft/Clear: | Default parameters: |
0.75-4.0 | Sign: Symbol: | 14 mm | Distance | Clear | Design: Balance Clear |
N Distance △ | 16 mm | Balance | |||
Balance ▷ | 18 mm | Near | |||
Near ▽ | 20 mm |
UniZone Classic
UniZone Classic is a standard free form progressive lens with a good balance between distance and near.
Addition: | Engravings | Minimum fitting height: | Design variations: | Soft/Clear: | Default parameters: |
0.75-4.0 | Sign: Symbol: | 16 mm | Balance | Clear | Design: Balance Clear |
C O | 20 mm |
Progressive Allround
Image Classic
A conventional front side multifocal lens with spherical back surface design. A good balance between distance, intermediate and near. Good possibilities to produce high powers, high prism and slab-off etc.
Addition: | Engravings | Minimum fitting height: | Design variations: | Soft/Clear: | Default parameters: |
1.0-3.0 | Sign: Symbol: | 18 mm | Balance | Clear | Design: Balance Clear |
- Y |
Concise Classic
A conventional front side multifocal lens with spherical back surface design. A good balance between distance, intermediate and near. Good possibilities to produce high powers, high prism and slab-off etc.
Addition: | Engravings | Minimum fitting height: | Design variations: | Soft/Clear: | Default parameters: |
1.0-3.0 | Sign: Symbol: | 17 mm | Balance | Clear | Design: Balance Clear |
- + | 17 mm |
Progressive Allround High Power
UniZone Omega Classic
A multifocal lens for high plus powers with classic back surface design and an Omega front surface with a zone of 40 mm. A good balance between distance, intermediate and near.
Addition: | Engravings | Minimum fitting height: | Design variations: | Soft/Clear: | Default parameters: |
0.75-4.0 | Sign: Symbol: | 16 mm | Balance | Clear | Design: Balance Clear |
C O |
Progressive Allround
Nuaco Perform™
A large distance field that softly change to an addition of 0.50 or 0.75 to relax the accommodation. The perfect lens for the you student that needs relaxation in the accommodation or the young presbyope that is not ready for full progressive lenses. Measured and fitted in the fitting cross.
Addition: | Engravings | Minimum fitting height: | Design variations: | Soft/Clear: | Default parameters: |
0.50-0.75 | Sign: Symbol: | 14 mm | Balance | Soft | CVD: 13 mm |
A ◇ | FFT: 4 degrees | ||||
PT: 6 degrees | |||||
Design: Balance Soft |
Progressiva Active
Go Perform™
Go Perform has fully optimized optics in all directions. Individual calculations of apherization and inset based on prescription and frame parameters. Go will also function well with wrapped frames. The priority is in a large distance and intermediate field with a smaller reading part with a low position. A soft design to minimize swaying effect in dynamic environments.
Addition: | Engravings | Minimum fitting height: | Design variations: | Soft/Clear: | Default parameters: |
0.75-4.0 | Sign: Symbol: | 21 mm | Distance | Soft | CVD: 13 mm |
G O | FFT: 4 degrees | ||||
PT: 6 degrees | |||||
Design: Distance Soft |
Drive Perform™
Drive Perform has fully optimized optics in all directions. Individual calculations of apherization and inset based on prescription and frame parameters. A large clear distance field, a well positioned intermediate zone for the instruments and smaller reading part. A clear design to give the best possible distance view.
Addition: | Engravings | Minimum fitting height: | Design variations: | Soft/Clear: | Default parameters: |
0.75-4.0 | Sign: Symbol: | 21 mm | Distance | Clear | CVD: 13 mm |
D O | FFT: 4 degrees | ||||
PT: 6 degrees | |||||
Design: Distance Clear |